– Kamailio SIP Server –

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
presence:pua_bla [2008/04/09 15:19] – 'force_active' is a parameter of presence_xml, not presence, module 212.119.189.91presence:pua_bla [2011/09/07 14:25] (current) – 92.112.156.8
Line 1: Line 1:
 +**Note** Instead of "Sender" hdr in the handle_publish parameter, the value set for pua_bla parameter header_name should be used.
 +
 +
 +
 +
 +
 +====== Sample Config File for OpenSER BLA Support ======
 +
 +Valid for OpenSER 1.3.x.
 +
 +<code c>
 +#
 +# simple quick-start config script
 +#
 +
 +# ----------- global configuration parameters ------------------------
 +
 +/* Uncomment these lines to enter debugging mode */ 
 +debug=7            # debug level (cmd line: -dddddddddd)
 +fork=no
 +log_stderror=yes
 +
 +check_via=no # (cmd. line: -v)
 +dns=no          # (cmd. line: -r)
 +rev_dns=no      # (cmd. line: -R)
 +listen=udp:192.168.2.132:5060
 +children=4
 +#fifo="/tmp/openser_fifo"
 +
 +#
 +# uncomment the following lines for TLS support
 +#disable_tls = 0
 +#listen = tls:your_IP:5061
 +#tls_verify_server = 1
 +#tls_verify_client = 1
 +#tls_require_client_certificate = 0
 +#tls_method = TLSv1
 +#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
 +#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
 +#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
 +
 +# ------------------ module loading ----------------------------------
 +mpath="../sip-server/modules/"
 +
 +loadmodule "mysql/mysql.so"
 +loadmodule "sl/sl.so"
 +loadmodule "maxfwd/maxfwd.so"
 +loadmodule "textops/textops.so"
 +loadmodule "tm/tm.so"
 +loadmodule "rr/rr.so"
 +loadmodule "presence/presence.so"
 +loadmodule "presence_xml/presence_xml.so"
 +loadmodule "avpops/avpops.so"
 +loadmodule "mi_fifo/mi_fifo.so"
 +loadmodule "usrloc/usrloc.so"
 +loadmodule "registrar/registrar.so"
 +loadmodule "pua/pua.so"
 +loadmodule "exec/exec.so"
 +loadmodule "pua_bla/pua_bla.so"
 +
 +# Uncomment this if you want digest authentication
 +# mysql.so must be loaded !
 +#loadmodule "/usr/local/lib/openser/modules/auth.so"
 +#loadmodule "/usr/local/lib/openser/modules/auth_db.so"
 +
 +# ----------------- setting module-specific parameters ---------------
 +
 +modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
 +
 +# -- usrloc params --
 +# Uncomment this if you want to use SQL database 
 +# for persistent storage and comment the previous line
 +modparam("usrloc", "db_mode", 2)
 +
 +# -- auth params --
 +# Uncomment if you are using auth module
 +#
 +#modparam("auth_db", "calculate_ha1", yes)
 +#
 +# If you set "calculate_ha1" parameter to yes (which true in this config), 
 +# uncomment also the following parameter)
 +#
 +#modparam("auth_db", "password_column", "password")
 +
 +# -- rr params --
 +# add value to ;lr param to make some broken UAs happy
 +modparam("rr", "enable_full_lr", 1)
 +
 +# -- presence params --
 +modparam("presence|presence_xml", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
 +modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
 +modparam("pua", "db_url", "mysql://openser:openserrw@192.168.2.132/openser")
 +modparam("pua", "db_table", "pua")
 +
 +modparam("presence_xml", "force_active", 1)
 +modparam("presence", "max_expires", 3600)
 +modparam("presence", "server_address", "sip:sa@192.168.2.132:5060")
 +modparam("pua_bla", "server_address", "sip:sa@192.168.2.132:5060")
 +modparam("pua_bla", "default_domain",  "192.168.2.132")
 +modparam("pua_bla", "header_name",  "Sender")
 +
 +# -------------------------  request routing logic -------------------
 +
 +# main routing logic
 +
 +route{
 +
 +
 + # initial sanity checks -- messages with
 + # max_forwards==0, or excessively long requests
 + if (!mf_process_maxfwd_header("10")) {
 + sl_send_reply("483","Too Many Hops");
 + exit;
 + };
 +
 + if (msg:len >=  2048 ) {
 + sl_send_reply("513", "Message too big");
 + exit;
 + };
 +
 + # we record-route all messages -- to make sure that
 + # subsequent messages will go through our proxy; that's
 + # particularly good if upstream and downstream entities
 + # use different transport protocol
 + if (!method=="REGISTER")
 + record_route();
 +
 + # subsequent messages withing a dialog should take the
 + # path determined by record-routing
 + if (loose_route()) {
 + # mark routing logic in request
 + append_hf("P-hint: rr-enforced\r\n"); 
 + route(1);
 + };
 + if(method == "INVITE")
 + setflag(5);
 +
 + if (!uri==myself) {
 + # mark routing logic in request
 + append_hf("P-hint: outbound\r\n"); 
 + # if you have some interdomain connections via TLS
 + #if(uri=~"@tls_domain1.net") {
 + # t_relay("tls:domain1.net");
 + # exit;
 + #} else if(uri=~"@tls_domain2.net") {
 + # t_relay("tls:domain2.net");
 + # exit;
 + #}
 + route(1);
 + };
 +
 + # if the request is for other domain use UsrLoc
 + # (in case, it does not work, use the following command
 + # with proper names and addresses in it)
 + if (uri==myself) {
 +
 + if( is_method("PUBLISH|SUBSCRIBE"))
 + route(2);
 + if(is_method("NOTIFY"))
 + if( $hdr(event)=="dialog;sla")
 + route(2);
 +
 +
 + if (method=="REGISTER") {
 +
 + # Uncomment this if you want to use digest authentication
 + #if (!www_authorize("openser.org", "subscriber")) {
 + # www_challenge("openser.org", "0");
 + # exit;
 + #};
 +
 + if($hdr(User-Agent)== "PolycomSoundPointIP-SPIP_430-UA/2.0.3.0127")
 + bla_set_flag();
 + save("location");
 + exit;
 + };
 +
 + # native SIP destinations are handled using our USRLOC DB
 + if (!lookup("location")) {
 + sl_send_reply("404", "Not Found");
 + exit;
 + };
 + append_hf("P-hint: usrloc applied\r\n"); 
 + };
 +
 + route(1);
 +}
 +
 +
 +route[1] {
 + # send it out now; use stateful forwarding as it works reliably
 + # even for UDP2TCP
 + if (!t_relay()) {
 + sl_reply_error();
 + };
 + exit;
 +}
 +
 +route[2]
 +{
 + if (! t_newtran())
 +    {
 +        sl_reply_error();
 +        exit;
 +     };
 +
 + if(is_method("PUBLISH"))
 + {
 + if($hdr(Sender)!= NULL)
 + handle_publish("$hdr(Sender)");
 + else
 + handle_publish("");
 + t_release();
 + } 
 + else 
 + if( is_method("SUBSCRIBE"))
 + {
 + handle_subscribe();
 + t_release();
 + }
 + else
 + if(is_method("NOTIFY")) 
 + {
 + bla_handle_notify();
 + t_reply("200", "OK");
 + t_release();
 + }
 + exit;
 +}
 +
 +
 +</code>
 +
 +[[http://editingwritingservices.org/article.php|article writing service]]
 +
  

Trace: