OpenSER Configuration File For Presence Server

The example uses '10.10.10.10' as server's IP address, you have to replace it with yours.

#
# $Id$
#
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
/* Uncomment these lines to enter debugging mode */ 
debug=7            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes
 
check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=udp:10.10.10.10:5060
children=4
 
 
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
 
# ------------------ module loading ----------------------------------
mpath="/usr/local/lib/openser/modules/"
 
loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "presence.so"
loadmodule "avpops.so"
 
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "mi_fifo.so"
 
 
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/openser/modules/auth.so"
#loadmodule "/usr/local/lib/openser/modules/auth_db.so"
 
# ----------------- setting module-specific parameters ---------------
 
# -- usrloc params --
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
 
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# -- presence params --
modparam("presence|usrloc", "db_url",
   "mysql://openser:openserrw@127.0.0.1/openser")
modparam("presence", "max_expires", 3600)
modparam("presence", "force_active", 1)
modparam("presence", "server_address", "sip:10.10.10.10:5060" )
 
# -- mi_fifo params --
modparam("mi_fifo","fifo_name", "/tmp/openser_fifo")
 
# -------------------------  request routing logic -------------------
 
# main routing logic
 
route{
	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};
 
	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};
 
	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	if (!method=="REGISTER")
		record_route();
 
	# subsequent messages withing a dialog should take the
	# path determined by record-routing
	if (loose_route()) {
		# mark routing logic in request
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};
 
	if (!uri==myself) {
		# mark routing logic in request
		append_hf("P-hint: outbound\r\n"); 
		# if you have some interdomain connections via TLS
		#if(uri=~"@tls_domain1.net") {
		#	t_relay("tls:domain1.net");
		#	exit;
		#} else if(uri=~"@tls_domain2.net") {
		#	t_relay("tls:domain2.net");
		#	exit;
		#}
		route(1);
	};
 
	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri==myself) {
 
		# presence handling
		if( is_method("PUBLISH|SUBSCRIBE"))
			route(2);
 
		if (method=="REGISTER") {
 
			# Uncomment this if you want to use digest authentication
			#if (!www_authorize("openser.org", "subscriber")) {
			#	www_challenge("openser.org", "0");
			#	exit;
			#};
 
			save("location");
			exit;
		};
 
		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};
 
	route(1);
}
 
 
route[1] {
	# send it out now; use stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}
 
# presence handling route
route[2]
{
	# absorb retransmissions
	if (! t_newtran())
	{
	        sl_reply_error();
	        exit;
	};
 
	if(is_method("PUBLISH"))
	{
		handle_publish();
		t_release();
	} else if( is_method("SUBSCRIBE")) {
		handle_subscribe();
		t_release();
	};
 
	exit;
}

The example uses '10.10.10.10' as server's IP address, you have to replace it with yours.

For NAT traversal you have to use fix_nated_contact() from 'nathelper' module. In your main SIP server, just forward PUBLISH and SUBSCRIBE requests to the presence server.

#
# $Id$
#
# simple quick-start config script
#
 
# ----------- global configuration parameters ------------------------
 
/* Uncomment these lines to enter debugging mode */
debug=7            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes
 
check_via=no    # (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=udp:10.10.10.10:5060
children=4
 
#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem"
 
# ------------------ module loading ----------------------------------
mpath="/usr/local/openser/lib/openser/modules/"
 
loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "presence.so"
loadmodule "avpops.so"
loadmodule "mi_fifo.so"
 
## Uncomment this line if this presence server is handling Dialog Info presence ( BLF )
#loadmodule "presence_dialoginfo.so"
 
## Uncomment this line if this presence server is handling MWI ( Message Waiting Indicator, the voicemail light )
#loadmodule "presence_mwi.so"
 
# ----------------- setting module-specific parameters ---------------
 
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
 
# -- presence params --
modparam("presence", "db_url", "mysql://openser:openserrw@localhost/openser")
 
modparam("presence", "force_active", 1)
 
modparam("presence", "server_address", "sip:10.10.10.10:5060")
 
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo_presence")
 
# -------------------------  request routing logic -------------------
 
# main routing logic
 
route{
    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    };
 
    if (msg:len >=  2048 ) {
        sl_send_reply("513", "Message too big");
        exit;
    };
 
    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!is_method("SUBSCRIBE|PUBLISH")) {
        sl_send_reply("488", "Not Acceptable Here");
        exit;
    }
 
    # presence handling
    if (! t_newtran())
    {
        sl_reply_error();
        exit;
     };
 
    if(is_method("PUBLISH"))
    {
        handle_publish("");
        t_release();
    } else if( is_method("SUBSCRIBE"))
    {
        handle_subscribe();
        t_release();
    };
 
    exit;
}